Owatrol Aquadecks®

Aquadecks® Water-based saturating finish for all wood types. Can be applied to both new and old wood. Suitable for all wood types. High UV resistance. Mild odor and fast drying.

Aquadecks® Water-based saturating finish for all wood types. Can be applied to both new and old wood. Suitable for all wood types. High UV resistance. Mild odor and fast drying. PROPERTIES Water-based wood saturator. Suitable for untreated new or weathered wood. Ready to use. Easy to apply. Penetrates very deeply into the wood surface. Non-film forming. Does not flake, peel or powder. Very good resistance to weather conditions. For horizontal and vertical surfaces: decks, garden furniture, cladding ... Enhanced UV protection. Low odor. Fast drying. Easy maintenance: no need to sand or scrape. APPLICATIONS Indoor - Outdoor Exotic wood types: teak, ipé, cumaru, bangkirai, movingui, acacia, masaranduba … Softwood: pine, spruce, red cedar, larch, provided it has not been pressure-treated ... Heat-treated wood. APPLICATION ADVICE The wood must be clean and free from mold, dust, grease stains and old finish layers. The wood must be dry (max. moisture content 18%). Do not apply in direct sunlight. It must not rain for the first 12 hours after the product has been applied. Watch out for morning dew. Cover everything that should not be treated. The wood must be untreated and not previously treated with a moisture-repellent, crack-preventing or color-restoring agent. OWATROL advice: treat damaged wood with SANIXYL first where necessary. APPLICATION Stir well before and during use. Do not dilute. Apply a coat of AQUADECKS in the direction of the wood grain. Work on each surface for a maximum of 30 minutes. Apply a second coat as soon as the wood no longer looks wet. Use a paint brush to brush away any excess product before it dries. Otherwise, shiny patches may form. To protect the wood the product must penetrate into the wood and not remain on the surface. If the product is applied with a sprayer, it is always recommended to brush it in. This allows it to penetrate the wood better and ensures a beautiful, even result. Important: do not allow it to dry between coats.