Epifanes Epoxy Finishing Filler

Two-component finishing filler. Very fine and flexible, exceptionally strong and non-shrinking during curing. Provides a very smooth surface with good mechanical properties. Preferably apply in thinner layers up to 1 mm

Application
Suitable for use on wood, steel, aluminium and polyester above and, if necessary, below the waterline. Knife filler for a super-fine finish over epoxy (filling) fillers such as Epifanes Epoxy Filler 1500 and Epifanes Epoxy Filler LG 800

Overcoating
After 24 hours at 18°C.

Coverage:
At a layer thickness of 0.5 mm, 750 ml per 1.2 m²

Description: Two-component finishing filler based on epoxy resin. Very fine and flexible, exceptionally strong and non-shrinking during curing. Provides a very smooth surface. Preferably apply in thinner layers up to 1 mm. Before use, first mix both components thoroughly separately and then together. Application: Wood, steel, aluminium and polyester, above and, if necessary, below the waterline. As a fine finishing layer over Epifanes Epoxy Filler 1300. To be used in a two-component system. If overcoating above the waterline with a single-component product, first apply a layer of Epifanes Poly-urethane topcoat. Sandable: after 24 hours at 18°C. Drying time: after 24 hours at 18°C. Working time at 20°C: 30-60 minutes, depending on temperature and the quantity mixed Overcoatable with: Epifanes Poly-urethane Yacht Varnish, Epifanes Poly-urethane Primer, Epifanes Epoxy Primer, Epifanes Interimcoat Mixing ratio by volume: 100 : 100 Mixing ratio by weight: 45 : 55 Other: Thoroughly wipe down filled areas with a degreasing agent to remove the greasy surface layer. This prevents the sandpaper from clogging and is necessary for good adhesion of the paint. Sand with grit 100-120.