Epifanes Epoxy Filler 1500

Very dense, water-resistant and non-shrinking, two-component filler. Resistant to immersion in water. Mechanically resistant, very good impact and shock resistance. Non-shrinking during drying and after curing. Easy to sand. Can be applied in a single operation up to a maximum of 1.5cm.

Application
Wood, steel, aluminium and polyester, below and above the waterline in combination with suitable primers. Generally, this epoxy filler is applied in a two-component paint system, but in combination with Epifanes Multi Marine Primer it can also be used in a one-component paint system.

Overcoating
After 24 hours at 18°C.

Mixing ratio by weight and volume
By volume 100 : 50 By weight 100 : 50

Application tips
After curing, thoroughly wipe down filled areas with Epifanes Cleaning Thinner. This prevents the sandpaper from clogging and is necessary to achieve good paint adhesion to the filler. Always sand this filler with 100-120 grit

Description: Very dense, water-resistant and non-shrinking, two-component filler based on epoxy resin. Can be applied in a single operation up to a maximum of 2 cm. Before use, thoroughly mix the components separately and then together. Application: Wood, steel, aluminium and polyester, below and above the waterline. Generally, an epoxy filler is applied in a two-component paint system, but is increasingly also used in a one-component system. Repair areas with Epifanes Epoxy Filler can be treated directly with a one-component primer or topcoat . On large surfaces, we recommend first applying a coat of Poly-urethane topcoat before a one-component topcoat can be applied. Sandable: after 24 hours at 18°C. Pot life at 20°C: 30-60 minutes depending on the amount mixed Advice: Thoroughly wipe down filled areas with a degreasing agent to remove the greasy surface layer. This prevents the sandpaper from clogging and is necessary to achieve good paint adhesion to the filler. Sand with 100-120 grit. Overcoating: After 24 hours at 18°C. Mixing ratio by volume: 100 : 100 Mixing ratio by weight: 80 : 50 Colours: Grey